After a break of some time, I recently restored a Family Bible once more. The book block was in very good shape, but, as often happens, the hinges on the spine had broken and the leather was in a pretty bad condition. Here are some before and after photos – click on a photo to start the slide show.
I have recently developed a slip cover for the well-loved Pocket Prayer Book for Orthodox Christians (aka the “Little Red Book), published by the Antiochian Orthodox Christian Archdiocese of America. I had been asked to rebind the book, but because it has a staple binding I was unsure how long it would last without needing to be repaired. A slip cover, by contrast, allows one to repair the book itself and simply reinsert it once more into the cover.
I was quite pleased with the outcome, which can be seen in the photos and in my Etsy shop here. It is bound in genuine, full-grain sheep nappa leather, with the same leather lining on the inside.
To enter this giveaway, please go to this Facebook post and either like and/or share it, and comment. It would also be great if you would like my page if you haven’t already done so!
This is an old post from my previous website. I’m reposting it here because it remains relevant and may be of help to some people.
Posting this here may seem like closing the stable door after the horse has bolted – after all, many of the people who visit this site do so because their Bibles are in various states of disrepair. But, having seen some of the Bibles that have come for repair recently, I have been thinking that it may be worth giving some advice on things to consider when buying a new Bible. Although it may appear that bookbinders can work miracles in making an old book look like new, there are some things that even we can’t make right.
Whatever Else You Do, Buy a Stitched Bible
This is really the most important point. From a binding perspective, there are two basic categories of mass-produced contemporary books, the glued and the stitched. Glued books consist of single pages that are glued together along the spine. (This is also known as perfect binding). They are only held together by glue, albeit a very strong hot glue. But when they come apart, while one can re-glue individual pages, re-gluing the whole Bible is not going to produce a satisfactory result – partly because one is unlikely to have much margin to work with, and partly because the cold glue that most bookbinders work with today is not as strong as the original hot glue that was used in the factory.
Stitched books, on the other hand, are held together by both stitching and glue. They are printed in such a way that the book consists of a series of booklets called signatures. Each signature is folded over and is usually stitched through the fold. (This is sometimes called Smyth sewn). If you look at the top or bottom of the Bible, you should be able to see if it is made up of signatures (which vary in thickness) that indicate that it is sewn. (Leonard’s Books has some more advice on this here).
I cannot over-emphasise the importance of buying a stitched Bible rather than a glued one. Not only are stitched books far more durable that glued ones, but they also open far better and can lie flat, something that a glued book will not easily do. A glued book is all very well for a thesis or a whodunit that is not likely to be read again, but is totally unsuitable for a book that will be constantly re-read and cherished.
Bonded Leather is Not Leather
I have been horrified to see the prices that are asked for Bibles bound in bonded leather. It needs to be stated very clearly that bonded leather is not leather, but is rather recycled leather fibres that are held together by a substantial amount of a gluey substance. To call bonded leather leather is like calling chipboard wood – and using chipboard in place of wood is probably a better option than using bonded leather in place of leather, because wood does not need to be supple as leather does, and bonded leather is definitely not supple, nor does it last well.
Even more horrifying is the fact that it appears that some Bible manufacturers are passing bonded leather off as genuine leather. I recently had a Bible in for repair that I thought looked more like bonded leather than genuine leather, although it was stamped “Genuine Leather” on the back. I thought that I must be mistaken, but, when I opened it up, there was no mistaking the grey nylon underside of the bonded leather.
Consider Rebinding a New Bible
Instead of buying a glued Bible bound in bonded leather for a hefty price, you would be far better off buying a well-stitched book block with a cheap binding. Even a stitched paperback is preferable to a glued Bible, although a hard cover is preferable as it is likely to round more easily. You could then have it rebound in leather, either immediately, or when you can afford to do so. This option will also allow you to personalise the binding as you consider what sort of cover you want. While the leather available in this country is limited (and I don’t import leather as it would drive the prices up exponentially), I nevertheless use high-quality, full-grain, genuine leather that lasts well, and will protect your Bible for many years to come.
Welcome to my new website, which I am still in the process of setting up. Since moving to Pietermaritzburg in the middle of last year, I have had to re-invent what was previously Langeberg Bookbinding (the site is still up, but will expire before long). I am being fairly focused in the binding work that I do, focusing mainly on selling on my Etsy shop. However, I am also open to doing a limited amount of binding and repair work for local customers, particularly the leather rebinding of Bibles and liturgical books, hence the need for a website.
In addition, I also plan to add resources here that can supplement the material on my Etsy shop.